Follow the steps below to check the status of the speaker’s BLUETOOTH indicator.

1. Delete the Bluetooth device information of your playback device.

   The method of operation varies depending on the playback device. For details, see the following.
   How to delete the Bluetooth device information of your playback device

   If the speaker type isn’t listed in the Bluetooth device information on the playback device, proceed to step 2.

2. Initialize the speaker.
   Note:

   • WARNING! Performing this step will reset all settings in the speaker and deletes all pairing and device information.

   • To complete this step, which method you use will depend on the speaker model number. For details, refer to how to reset hub page to find out the reset/initialize steps by selecting your speaker model or refer to your speaker model's Help Guide. Manuals are posted on your model support page.
   • The image used is for the SRS-XB22 and SRS-XB12 wireless speaker.
      
   1. Turn on your speaker.
   2. Press and hold the - (volume -) and (power)/ PAIRING buttons simultaneously for more than five seconds.

      Example for SRS-XB22

      
      
      Example for SRS-XB12
      

   3. Turn on your speaker.

3. What's the status of the Bluetooth indicator?

   Example for SRS-XB22
   
   
   Example for SRS-XB12
   

• The Bluetooth indicator flashes slowly or lights up.
  • The device is on but the initialization isn't successful. Initialize the speaker again.
• The Bluetooth indicator flashes quickly (three times a second).

Back to Main Menu