Why doesn't Scandisk run when I did not shut down Windows properly?
Why doesn't Scandisk run when I did not shut down Windows properly?
If Scandisk does not start up after a bad shutdown, make sure that the setting is enabled using the following steps:
1) Click [Start] -> [Run].
2) Type "msconfig" in the box of [Open], and click [OK]. System Configuration Utility] appears.
3) Click the [General] tab and the [Advanced] button. [Advanced Troubleshooting Settings] appears.
4) Remove the check from the [Disable Scandisk after bad shutdown] box.
If Scandisk does not start up after a bad shutdown, make sure that the setting is enabled using the following steps:
1) Click [Start] -> [Run].
2) Type "msconfig" in the box of [Open], and click [OK]. System Configuration Utility] appears.
3) Click the [General] tab and the [Advanced] button. [Advanced Troubleshooting Settings] appears.
4) Remove the check from the [Disable Scandisk after bad shutdown] box.
Warranty Information
For information on Sony warranties
Spare Parts Distributor
To contact our Spare Parts Distributor
Contact support
Contact our Support team
Support by Sony (Mobile App)
Never miss an update again! Find information and receive instant notifications about your product
