Important precautions for updating from Ver. 1.32 or earlier

Update order: Ver. 1.35 → Ver. 2.01 → Ver. 2.02

• You must first update via Ver. 1.35 to Ver. 2.01 before proceeding to the latest version (Ver. 2.02).
• Attempting to update directly to Ver. 2.02 will cause an error.

Checking your System Software Version

• Note: If the Date/Time setting screen appears when you turn on your camera, be sure to set the date or time to the correct values.
  1. Select Menu → Setup → Setup Option → Version.
  2. The system software version will be displayed.

For Imaging Edge Mobile App Users:

• Updated cameras cannot connect to the Imaging Edge Mobile app.
• Install the Creators' App after updating the camera.
• Ensure the Imaging Edge Mobile app is Ver. 7.7.2 or later to pair the camera with the Creators' App.
• If using an iPhone/iPad, restart the device after the camera update and then pair the camera with the Creators' App.
• Update the Imaging Edge Mobile app if it is not the latest version before pairing with the Creators' App.
  • For instructions on installing and connecting the Creators' App, please refer to the guide for migrating from the Imaging Edge Mobile app to the Creators' App.

Is your firmware version later than Ver. 2.00?

• No, Ver. 1.32 or earlier:
  Update to Ver. 2.01 (via 1.35) first and then to Ver. 2.02.
  • Proceed to Ver. 2.01 (via 1.35) (Windows) download page
  • Proceed to Ver. 2.01 (via 1.35) (Mac) download page
• Yes, Ver. 2.00 or later:
  Update to Ver. 2.02 (latest).
  • Proceed to Ver. 2.02 (latest) download page