How to create a set of Recovery Discs using the VAIO Care version 8 software.

There are no system Recovery discs included with the computer. The recovery data required to return the computer to the original, factory-installed condition is included on a special partition of the hard drive. The following procedure can be used to create a set of Recovery Discs from that data, which can be used to restore the recovery partition and return the computer to the original, factory-installed condition in case this is ever necessary.

IMPORTANT:

• Personal data is not backed up to Recovery discs.
• If the computer uses an external CD/DVD drive, ensure the drive is plugged in according to the instructions in the manual.
• Make sure the computer is powered on and press the Assist button.

1. In the VAIO Care application, click Advanced Tools.

   

2. Click Restore and recovery.

   

   NOTE: If prompted for an administrator password or a User Account Control prompt is displayed, type the appropriate password, or click Yes.

3. Under Restore and Recovery, click Create Recovery Media.

   

4. Click Next.

   

   NOTE: Connect the AC adapter and do not interrupt power during the process.

5. Click the desired media type.

   IMPORTANT: Follow this procedure to use a USB flash drive  to create Recovery Media.

   

   IMPORTANT:

   • If the Create Recovery Media option is not available , you may be using a computer that does not have an internal optical drive, such as a netbook. To resolve the issue, connect an external optical drive and restart the VAIO Care™ software.
   • Use a USB flash drive to store Recovery Media. The USB flash drive may be used to start VAIO Care Rescue if a system failure occurs.
6. Insert a DVD or DVD-DL disc into the optical drive.

   NOTES:

   • The types of discs supported and the number of each required is displayed.
   • The number of discs needed to create the set varies by model.
7. Once the disc is recognized, in the Insert a blank disc and select the drive window, click the Next button.

   

8. In the Proceed creating media window, click the Next button.

   NOTE: Even though it takes longer, Sony recommends verifying that the recovery discs were created properly by checking the box next to Verify my disc was created correctly (slower).

   

9. Click the Start button.

   NOTE: A status window is displayed.

10. Once the first disc has been created, remove and label it properly then insert disk two if needed.

    

11. Insert another disc and then click the Next button.
12. Once the second disc has been created, remove it and label it properly.
13. Click the OK button.