Article ID : 00339655 / Last Modified : 15/03/2024Print

Cannot attach or lock the Front Panel even though I follow the Operating Instructions.

    IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

    When attaching the faceplate to the front panel of the receiver, follow these steps:

    1. Insert the right side of the faceplate into the front panel.
    2. Push the Control dial on the faceplate until it locks into place on the front panel.
      Note: You may need to apply some force to get it to lock into place.