Article ID : 00203288 / Last Modified : 07/08/2020Print

Try performing a soft reset

    Try performing a soft reset

    Before you start:

    1. If an external USB hard disc is connected to the TV, disconnect the USB cable from the TV before resetting.
    2. If the TV is turned off, turn it on first and perform the following operation.

    How to perform the soft reset:

    1. Point the remote control to the illumination LED and press and hold the POWER button of the remote control for about 5 seconds until a “Power off” message appears.

      [1]: Illumination LED
      [2]: Remote control POWER button

    2. The TV then reboots automatically. Wait for approximately one minute, and the TV will turn back on.
      If it does not reboot, press the POWER button on the remote control to turn on the TV.

    Is the problem solved?

    Yes, the problem is solved No, take me to the next step


    ❮ Back | Browse ▤